This PPT presentation is based on the topic A Seminar on ELECTRONIC EYE
A Seminar on ELECTRONIC EYE is very common topic for seminar presentation.
This ppt slide on A Seminar on ELECTRONIC EYE is a guidline for students or proffesional preparing for seminar presentation on A Seminar on ELECTRONIC EYE.
IntroductionElectronic eye has much use in this electronic age. Also known as magic eye. It can be used as an automatic guest indicator at the door, if fixed at the bottom of the door entrance. Once it is installed at the door there is no need to install a call bell. It can also be used at homes or in banks as a burglar alarm.
principle of working mainly depends on the
LDR is a device which has a resistance which varies according to the amount of light falling on its surface
Electronic eye structure
Resistors : R1 - 270K
R2 - 12K
R3 - LDR
Capacitor : C1 - 0.02MFD
Semiconductors : Q1 - BC547
Q2 - BEL188
Miscellaneous : 3V Battery
LDR-Light dependent resistor
Transistor BC 547 - NPN type
If The intensity of light is more the resistance of the LDR is less
If The intensity of light is less the resistance of the LDR is more
The two transistors BC547 and BEL188 both working together as a complimentary pair direct coupled amplifier. For oscillation of a circuit feedback amplifier Transistor BEL188 is collector giving of 0.2MFD of 12K resistor starts to pre transistor BC547.
Electronic eye circuit works as light intensity indicator.
Speaker will be activated.
Transistor BEL-188 is used to amplify the output signal
Characteristics of BEL-188 Vceo(min) - 15v Vcbo - 25v Vebo - 5v Vce - 1v Vcesat - 0.5v
We can increase the range of this equipment by using better sensor.
We can use this as Remote Controller.
Easy to construct
Low power consumption
Real time applications
It is difficult to work with this equipment if there is no sufficient lighting conditions.
Unnecessary disturbances may occur while using in the Apartments
It can be used as an automatic guest indicator at the door.
It can also be used in banks as a burglar alarm.
Electronic Eye is a vital component in any electric circuit which is to be turned on and off - for example, solar powered garden lights, and night security lighting.
An Electronic Eye can even be used in a simple remote control circuit using the backlight of a mobile phone to turn on a device
Once it is installed at the door there is no need to install a call bell.
Only 3V DC power supply is required for operating the circuit.
Therefore we have reached the epilogue of this project and we have worked on this project because this provides many real time applications
So, it can be used in many security applications
Thus this Electronic Eye can detect the light intensity by using LDR(Light Dependent Resistor
Sign In or Signup To Comment
its reallyy usefull site than others tnaq.
email@example.com Posted on 27-01-2014
I...m so happy ...
Because......this site ....is very useful....for.me....and....it helps me in every project work...